Apply one very thin coat with cloth ball or polishing machine. The wax should be polished in yet soft state within 1-2 hours. do not apply under 10 deg.C. The surface can be oiled first. Use BioPin Resin Floor oil or BioPin Floor oil AQUA, or equivalent. This wax can also be applied hot and liquid. Heat carefully in water bath (do not exceed 70deg.C)

a natural turpentine extracted from orange skins. Also called citrus terpene.

For heavy wear and tear areas indoors, wooden floors, doors, furniture, wooden bench tops, dining tables.. Can also be used on other absorbent areas like cork or unglazed tiles. This resin floor oil is rich in tung oil and the solvent is citrus terpene (orangey smell). Once dry it can be in contact with food. The timber impregnation tretment is done in one time by applying the oil wet in wet. Then let dry it dry out a day or two before waxing or further oiling. A curing time of a few days is necessary before full use.. Vapour diffusion is not significantly reduced and the surface is still open-pored and can breathe. In case of damage it can be repaired easily.

For use on wooden surfaces exposed to wear and tear like floor and tops. It can be used by itself or after an impregnation treatment with the resin floor oil. It is ready for polishing after a 3 to 6 hours drying time. It is pleasant to touch and has a velvety satin finish.

Made of plant oils, waxes and resins, the hard wax oil is designed for wooden or cork floors and other interior wooden surfaces. It enhances the colour of the flooring and revives the grain of the wood. The finish will be dirt and liquid repellent, and highly wear resistant. Apply 2 coats. May be polished after drying for greater smoothness and gloss using a white pad or a polishing block.

For the maintenance of already oiled garden furniture and for the first oiling of untreated garden furniture out of hard or soft woods. Contains no fungicides. Soft timbers should not be permanently exposed to the weather.

•This pigmented oil (teak) gives protection against the UV radiation. Re-oil regularly to prevent the wood from becoming grey. The working of the timber is significantly reduced.

Clear interior varnish for wooden surfaces, especially floors. hardwearing, pleasant orangey smell, has sealing properties (reduces breathing and also gas emissions). Gloss finish.

For untreated absorbent floors and benches made of timber or cork. Interior use only. (Has also been succesfully used on concrete floors because of its good coverage. Please test first.) BioPin Floor Oil is a well penetrating primer made of plant oils. It does not modify the steam absorption and diffusion of the surface (breathing). It protects against the action of water and makes softer timber and cork more hard-wearing. Depending on surface absorbency, apply the Floor Oil by brush or sponge in 1 or 2 thin and even coats. Work without interruption, always spreading or removing any excess because the Floor Oil quickly becomes tacky. Do not use if temperature is under 8 degrees.

•  An elastic and wear-resistant clear varnish made of plant oils and resins.

•  Satin finish, fast drying. Use as an interior surface treatment for wood (TG floors, parquet) and cork tiled floors.
Matai and some hard timbers may contain compounds that delay drying time.

•  Use when the weather is neither too cold (<8degC) nor too hot (>24degC). Is solvent-free and has no smell except the faint one of the oils.

A special weather-proof oil for the preservation of external untreated wooden surfaces, in particular on yachts and boats, but also for deckings and other exterior uses of a clear oil. The high Tung Oil content ensures lasting elasticity as well as excellent penetration and adhesion properties. Gloss finish. Apply 3 to 5 coats until the wood is saturated and a thin oil film has been formed.

Seals all wooden surfaces, both indoors and outdoors, especially in the boat construction and, in the home, to everything liable to damp conditions (eg bathrooms, kitchens, doorways, ramps...). This superb varnish is a traditional boat varnish made with high performance water repellents, that protect the wood from water and seawater, and also from abrasion damage. It provides excellent smoothness and flow properties, and a lasting elasticity, meeting the most demanding reqirements.

The Polyx Oil is used on all kinds of wooden floors, hardwoods and softwoods. It produces an even satin effect after 2 coats. It is easy to apply in a DIY situation. It is recommended to apply it sparingly.

Outstanding coverage (only 2 coats, no primer). retains wood character. Based on natural oils and waxes. Microporous. Will not crack, flake, peel or blister. Water-repellent and dirt resitant. Easy to clean. Use on all interior wood work, on all wood species and wood products, also on PVC, concete. Suitable for all surfaces including floors.

A clear and semi-transparent interior wood finish. Particularly recommended for interior doors, wooden furniture, joinery and toys. In one simple operation it produces a rich professional satin finish. Can also be used on other wood surfaces. Also on floors where it is applied first and topped with 2 coats of Polyx oil.

Clear primer for woods with high oil content such as kwila. It is particularly deep penetrating and intensifies the colour and the grain of the wood.

OSMO TopOil is an oil and wax mixture used as a clear treatment for furniture and wooden kitchen work tops. the wooden surface retains its natural matt finish and become resistant to common substances such as wine, beer, fizzy drinks and fruit juices. For maintenance use natural products like OSMO maintenance products. If using a desinfectant, dilute it according to the manufacturer's instructions (do not use concentrated).